Rocket tanks of carbon-fiber–reinforced plastic are proven possible


MT Aerospace and ArianeGroup signed contracts with ESA on 14 May 2019 to develop Phoebus, a prototype of a highly-optimised black upper stage. Rocket upper stages are commonly made of aluminium but switching to carbon composites lowers cost and could yield two tonnes spare payload capacity. Credit: ArianeGroup

Future rockets could fly with tanks made of lightweight carbon fiber reinforced plastic thanks to ground-breaking research carried out within ESA’s Future Launchers Preparatory Program.

Building on earlier studies, MT Aerospace in Germany has demonstrated a novel design of a small scale tank made of a unique carbon-fiber reinforced plastic (CFRP) that is not only leak-proof with liquid hydrogen, but also compatible with liquid oxygen, without the use of a metal liner.

A tank made solely of CFRP is much lighter than metal, requires fewer parts and is therefore faster and cheaper to manufacture.

This is a milestone achievement as normally, storage of cryogenic propellants such as these which are cooled to -253˚C requires tanks with metallic liners to make them leak-proof, with or without a composite overwrap.

“Fuel tanks are safety-critical elements in any propulsion system,” explained Hans Steininger, CEO at MT Aerospace. “We have provided proof that a high-performance pressure tank made of CFRP can withstand cryogenic stress. In the future, the use of CFRP high-performance tanks should not only enable safe rocket launches, it can also exploit the advantage of significantly lower mass compared to metallic tanks.”

“This is a tremendous step forward. We have found a very specific carbon composite and processing method that will allow us to consider new architectures and combinations of functions for rocket upper stages which are not possible using metal,” added Kate Underhill, Upper stage and propulsion demonstrators project manager in the Future Launchers Preparatory Program at ESA.

Rocket tanks of carbon fibre reinforced plastic proven possible
Tests show that lightweight carbon-fibre reinforced plastic is strong enough to replace metal used in upper-stage rocket structures. This is an important milestone in Europe for the development of a prototype of a highly-optimised ‘black’ upper stage, Phoebus, a joint initiative by MT Aerospace and ArianeGroup, funded by ESA’s Future Launchers Preparatory Programme. MT Aerospace tested the strength of a subscale oxidiser tank made from carbon-fibre reinforced plastic. During these tests, the tank was filled and drained multiple times, pressurised beyond operational limits and shock tested to ensure no ignition event of the oxygen tank. Sensors monitored pressure, temperature, strain or a possible leakage. The analysis of the results and the overall good structural integrity of the tank prove the technology for use in a Phoebus upper stage. Credit: MT Aerospace AG

“Metal is leak-tight. To recreate the same property with carbon composite required a complex weave of black carbon fiber and a special resin. The material resisted cryogenic temperatures, pressure cycles and reactive substances over a number of separate tests.”

Following these ‘bottle’ tests, small-scale tank demonstrators with integrated thermal protection will soon be built for further tests. Data collected will feed into development of a full-scale demonstrator of a future highly-optimized upper stage, called Phoebus.

Phoebus will have 3.5m diameter hydrogen and oxygen tanks, thermal protection, structural assembly elements and feature new technologies in avionics, structures and propulsion equipment. CFRP will be applied in the tanks, the interface structure between the two tanks and the outside cylinder representative of the upper stage outer skin.

The Phoebus demonstrator will be tested with cryogenic fluids in 2023 to confirm the functional performance of the technologies and new cost-efficient production methods as part of a new contract to advance the development of highly optimized upper stages.

“Here is an excellent example of how ESA’s support to mature cutting-edge technologies leads to major breakthroughs. This new lightweight carbon-based material would allow the manufacture of an Ariane 6 upper stage that is two tons lighter—mass made free for payloads,” said Daniel Neuenschwander, ESA Director of Space Transportation.

The Phoebus project is a joint initiative by MT Aerospace and ArianeGroup in Germany to validate key technologies developed with support from ESA since May 2019.

Ariane 6 targets new missions with Astris kick stage

Provided by
European Space Agency

Rocket tanks of carbon-fiber–reinforced plastic are proven possible (2021, July 28)
retrieved 28 July 2021

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.



Read original article here

Denial of responsibility! TechCodex is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.


This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More