Inefficient building electrification risks prolonging fossil fuel use


Credit: Pixabay/CC0 Public Domain

A new study finds that decarbonization pathways need to incorporate more efficient electric heating technologies and more renewable energy sources to minimize strain on the U.S. electric grid during increased electricity usage from heating in December and January. Otherwise, harmful fossil fuels will continue to power these seasonal spikes in energy demand.

Buildings’ direct fossil fuel consumption, burned in water heaters, furnaces, and other heating sources, accounts for nearly 10 percent of greenhouse gas emissions in the United States. Switching to an electric system that powers heating through renewable energy sources, rather than coal, oil, and natural gas—the process known as building electrification or building decarbonization—is a crucial step towards achieving global net-zero climate goals.

However, most building decarbonization models have not accounted for seasonal fluctuations in energy demand for heating or cooling. This makes it difficult to predict what an eventual switch to cleaner, all-electric heating in buildings could mean for the nation’s electrical grid, especially during peaks in energy use.

A new study by researchers at Boston University School of Public Health (BU.S.PH), Harvard T.H. Chan School of Public Health (Harvard Chan School), Oregon State University (OSU), and the nonprofit Home Energy Efficiency Team (HEET) examined these seasonal changes in energy demand, and found that monthly energy consumption varies substantially and is highest in the winter months.

Published in Scientific Reports, the study presented novel modeling of multiple building electrification scenarios, and found that this seasonal surge in winter energy demand will be difficult to satisfy through current renewable sources, if buildings switch to low-efficiency electrified heating.

The findings emphasize the need for buildings to install more efficient home-heating technologies, such as ground source heat pumps.

“Our research reveals the degree of fluctuation in building energy demand and the benefits of using extremely efficient heating technologies when electrifying buildings,” says study lead and corresponding author Dr. Jonathan Buonocore, Assistant Professor of Environmental Health at BU.S.PH. “Historically, this fluctuation in building energy demand has been managed largely by gas, oil, and wood, all of which can be stored throughout the year and used during the winter. Electrified buildings, and the electrical system that supports them, will have to provide this same service of providing reliable heating in winter. More efficient electric heating technologies will reduce the electrical load put on the grid and improve the ability for this heating demand to be met with non-combustion renewables.”

For the study, Buonocore and colleagues analyzed building energy data from March 2010 to February 2020, and found that U.S. total monthly average for energy consumption—based on the current use of fossil fuels, as well as future use of electricity in the winter—varies by a factor of 1.6x, with the lowest demand in May, and the highest demand in January.

The researchers modeled these seasonal fluctuations in what they call the “Falcon Curve”—since a graph of the change in monthly energy consumption represents the shape of a falcon. The data shows that winter heating demand drives energy consumption to its highest levels in December and January, with a secondary peak in July and August due to cooling, and the lowest levels in April, May, September, and October.

The researchers also calculated the amount of additional renewable energy, specifically wind and solar energy, that would need to be generated to meet this increased demand in electricity. Without storage, demand response, or other tactics to manage grid load, buildings would require a 28x increase in January wind generation or a 303x increase in January solar energy to meet winter heating peaks.

But with more efficient renewables, such as air source heat pumps (ASHPs) or ground source heat pumps (GSHPs), buildings would only require 4.5x more winter wind generation, or 36x more solar energy—thus “flattening” the Falcon Curve as less new energy demand is placed on the electrical grid.

“This work really shows that technologies on both the demand and the supply side have a strong role to play in decarbonization,” says study co-author Dr. Parichehr Salimifard, Assistant Professor of College of Engineering at Oregon State University. Examples of these technologies on the energy supply side are geothermal building heating and renewable energy technologies that can provide energy at all hours, she says—such as renewables coupled with long-term storage, distributed energy resources (DERs) at all scales, and geothermal electricity generation where possible. “These can be coupled with technologies on demand side—i.e., in buildings—such as passive and active building energy efficiency measures, peak-shaving, and energy storage in buildings. These building-level technologies can both reduce the overall building energy demand by reducing both baseline and maximum energy demand as well as smooth the fluctuations in building energy demand, and consequently flatten the Falcon Curve.”

“The Falcon Curve draws our attention to a key relationship between the choice of building electrification technology and the impact of building electrification on our power grid,” says study co-author Zeyneb Magavi, co-executive director of HEET, a nonprofit climate solutions incubator.

Magavi cautions that this research does not yet quantify this relationship based on measured seasonal efficiency curves for specific technologies, or for more granular time scales or regions, or assess the numerous strategies and technologies that can help address the challenge. All of this must be considered in decarbonization planning.

Yet, Magavi says, this research clearly does indicate that “using a strategic combination of heat pump technologies (air-source, ground-source, and networked), as well as long-term energy storage, will help us electrify buildings more efficiently, economically, and equitably. The Falcon curve shows us a faster path to a clean, healthy energy future.”

“Our research makes clear that when accounting for seasonal fluctuations in energy consumption apparent in the Falcon Curve, the drive to electrify our buildings must be coupled with a commitment to energy-efficient technologies to ensure building decarbonization efforts maximize climate and health benefits,” says study senior author Dr. Joseph G. Allen, Associate Professor of Exposure Assessment Science and Director of the Healthy Buildings program at Harvard Chan School.

“Our work here shows a pathway for building electrification that avoids relying on fossil fuels, and avoids renewable combustion fuels, which still can produce air pollution, and possibly perpetuate disparities in air pollution exposure, despite being climate-neutral,” says Buonocore. “Avoiding issues like this is why it is important for public health experts to be involved in energy and climate policymaking.”

Decarbonizing the grid with flexible buildings

More information:
Jonathan J. Buonocore et al, Inefficient Building Electrification Will Require Massive Buildout of Renewable Energy and Seasonal Energy Storage, Scientific Reports (2022). DOI: 10.1038/s41598-022-15628-2

Provided by
Boston University

Inefficient building electrification risks prolonging fossil fuel use (2022, July 28)
retrieved 28 July 2022

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.



Read original article here

Denial of responsibility! TechCodex is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.

Leave a comment

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More